Планетарные щеточные машины для круглых труб серии PL и SP

Planetary brushing machines suitable for working round surfaces of any material, ferrous or non-ferrous, normally used for brushing stainless steel tubes, available in different models depending on the diameters to be worked and the feeding speed, to be installed on tube-mills with TIG, LASER or H.F. welding systems.

The machines Mod. PL are equipped with two brushes (flap wheels, Scotch-Brite or Tynex) and they are characterized by minimum overall dimensions and maximum efficiency, automatic brush wear compensation, possibility of applying inverters for adjusting the disc rotation speed and/or brush speed, dry working; the models of this group can be installed on TIG and LASER lines.

Instead, the brushing machines Mod. SP have bigger dimensions and they are suitable to be installed on LASER and H.F. lines, for working at high speed (up to 100 m/min.) and big working pressures, in perfect stability and sound-proofing; also the SP machines are equipped with two brushes having big dimensions (flap wheels, Scotch-Brite or Tynex), with peripheral speed adjustable by inverter, diameter of the drum contained in the size suitable to accommodate all the mechanisms, inverter for adjusting the drum rounds, dry working, electronic control by PLC S7.

Possibility to be used also after the tube cutting operation or individually “off-line” by applying automatic systems for piece loading and unloading, as well as inlet/outlet roller conveyors.

The list of the available planetary brushing machines, divided according to the type of tube-mills on which they can be installed and to the different working capacities, is the following:

MODELS FOR TIG LINES

MOD. PL:

  • PL 250/118                     working capacity OD min. mm.    6 – OD max. mm. 101,6
  • PL 350/208                   working capacity OD min. mm. 30 – OD max. mm. 168,3
  • PL 400/330                  working capacity OD min. mm. 60 – OD max. mm. 330

MODELS FOR LASER LINES

MOD. PL:

  • PL 250/118 FAST 3      working capacity OD min. mm.    6 – OD max. mm. 101,6
  • PL 350/208 FAST       working capacity OD min. mm. 30 – OD max. mm. 168,3

MOD. SP:

  • SP 350/600-154        working capacity OD min. mm.  20     – OD max. mm. 154
  • SP 350/600-220       working capacity OD min. mm.  30     – OD max. mm. 220
  • SP 350/600-330       working capacity OD min. mm. 168,3 – OD max. mm. 323,4
  • SP 350/800-127         working capacity OD min. mm.  20     – OD max. mm. 127
  • SP 350/800-220       working capacity OD min. mm.  30     – OD max. mm. 220

MODELS FOR H.F. LINES

MOD. SP:

  • SP 350/1300-127      working capacity OD min. mm. 20 – OD max. mm. 127
  • SP 350/1300-154      working capacity OD min. mm. 20 – OD est. max. mm. 154
  • SP 350/1300-220     working capacity OD min. mm. 20 – OD max. mm. 220

By clicking on the names of the different available planetary brushing machines on the right side of this page, you can see the single technical sheet and the photos of the specific selected model.

Instead, by clicking on the following link, you can see the whole catalogue of the machines to be installed in-line on tube-mills: IN-LINE MACHINES CATALOGUE

 

Запрос информации по этому изделию

Ознакомьтесь с нашей
Privacy Policy